1, The specification of the product including basic size information, electrical and mechanical properties.
| Basic size information |
| Color |
White |
| Pitch |
1.25mm |
| Mating lock |
without |
| Material |
PA66 |
| Flammability |
UL94V-0 |
| Wire Insulation Diameter |
1.00mm Max. |
| Mounting side |
Standard on-Board |
| Terminals material |
phosphor bronze, tin-plated/gold-flash finish |
| |
| Electrical properties |
| Current Rating |
1A AC, DC |
| Voltage Rating |
150V AC, DC |
| Contact Resistance |
30mΩ Max |
| Insulation Resistance |
500mΩ min |
| Withstanding Voltage |
500V AC/minute |
| |
| Mechanical properties |
| Operating Temperatureemperature range |
-25℃ to 85 ℃ |
| Other information please kindly check the following picture. |
2, Related drawing and report
3. Ratings & Applicable Wires
| Item |
Standard |
| Rated Voltage (Max.) |
100V AC/DC |
Insulation O.D. 1.50mm (Max.) |
| Rated Current (Max.) And Applicable Wires |
AWG#24 |
2.0A AC/DC |
| AWG#26 |
1.5A AC/DC |
| AWG#28 |
1.0A AC/DC |
| AWG#30 |
0.5A AC/DC |
| Ambient Temperature Range |
-25℃ ~ +85℃* |
*: Including terminal temperature rise
4. Electrical Performance
| Test Description |
Procedure |
Requirement |
| 4-1 |
Contact Resistance
|
Mate connectors, measure by dry circuit, 20mV max., 10mA.(Based upon JIS C5402 5.4) |
10mΩ (Max.) |
| 4-2 |
Insulation Resistance |
Mate connectors, apply 500V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 Method 302 Cond. B) |
1000MΩ (Min.) |
| 4-3 |
Dielectric Withstanding Voltage |
Mate connectors, apply 800V AC (rms) for 1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-STD-202 Method 301) |
No Breakdown. |
| 4-4 |
Contact Resistance on Crimped Portion |
Crimp the applicable wire on to the terminal, measure by dry circuit, 20mV (Max.)., 10mA. |
5mΩ (Max.) |
5. Mechanical Performance
| Test Description |
Procedure |
Requirement |
| 5-1 |
Actuator Insertion & Withdrawal Force |
Insert and withdraw connectors at the speed rate of 25±3mm / minute. |
Refer to paragraph 7-2 |
| 5-2 |
Crimping Pull Out Force |
Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8) |
AWG#24 |
3.0kgf (Min) |
| AWG#26 |
2.0kgf (Min) |
| AWG#28 |
1.0kgf (Min) |
| AWG#30 |
0.8kgf (Min) |
| 5-3 |
Terminal Insertion Force. |
Insert the crimped terminal into the housing. |
1.00kgf (Max.) |
| 5-4 |
Terminal/Housing Retention Force. |
Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing. |
1.50kgf (Min.) |
| 5-5 |
Pin Retention Force |
Apply axial push force at the speed rate of 25±3mm / minute |
1.00kgf (Min.) |
| 5-6 |
Durability |
When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute. |
Contact Resistance 20mΩ (Max.) |
| 5-7 |
Vibration |
Amplitude: 1.5mm P-P
Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes.
(Based upon MIL-STD-202 Method 201A)
|
Appearance No Damage.
Contact Resistance 20mΩ (Max.)
Discontinuity 1 μsec.(Max.)
|
| 5-8 |
Physical Shock |
490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A) |
3, FAQ
Q:Do you allow multiple design per setup?
A:Yes.We accept OEM service and allow multiple design per setup.
Q:How long does shipping take?
A:It depends on the destination location and quantity. In most developed world, delivery by Fed x/UPS/DHL is normally 3-5 days(excluding weekends).
Q: How is the goods packaged ?
A: Usually in bags, tube, pipe, plated & carton
4, Various payment & delivery way
In order to make you get product quickly and send money easily, we can offer differenct payment terms
for you.
- If the total value of order is less than USD200, please kindly choose western union or paypal.
- If the total value of order is between USD200 and USD500, please kindly choose western union.
- If the total value of order is over USD500, please kindly choose western union or TT.
- If the total value of order is over USD5000, L/C at sight will be considered by us, but the commision fee will be shared by us together.
Product Tags:
|
|
Electronics Single Row Printed Circuit Board Connectors With PA66 Material Crimp housing Images
|
